Lancaster Theological Seminary - Lark 204
The technology available includes a wall mounted display, USB camera, and USB speakerphone system. Users must provide their own laptop, as a computer is not installed in the classroom.
For a video walk-through of these instructions, please see:
Power on all necessary devices
- Power on the display using the handheld remote control.
- Power on the Yamaha speakerphone system by pressing the power button (Green = Power On). It takes about 30 seconds to fully power on.
- Check the black box mounted on the wall (corner of the room, left of the display). It should already be powered on. It should be set to HDMI1. Note: Do not turn off this device when you leave the room.
Present from a laptop
- For laptops with USB-C connections:
- Ensure both the HDMI and USB cables from the wall box are connected to the USB-C interface/adapter.
- Connect the USB-C adapter to your laptop
- For laptops without USB-C:
- Disconnect the HDMI and USB cables from the adapter and connect them directly to your laptop.
- Your laptop should now display the content of your screen on the Display
- If your laptop does not automatically detect the output devices,
- Check to make sure the controller mounted on the wall is powered on and set to HDMI1
- Check the display settings on your laptop are set to mirror your desktop
- Unplug and plug in the USB-C adapter again
If presenting to Zoom participants outside the classroom
- Launch Zoom Meeting from the laptop
- Ensure the following Microphone, Speaker, and Camera settings are selected for Audio & Video when joining the meeting:
- Audio Input / Microphone = Yamaha YVC-1000MS
- Audio Output / Speaker = Yamaha YVC-1000MS
- Camera = AW-UE4 (the camera mounted on top of Display)
- To control the camera's zoom in/out capabilities, use the light gray handheld remote control.